歡迎來到北京多多賓城建筑機械有限公司
- 010-61441596
-
GQ50B型鋼筋切斷機主要技術參數（鋼筋抗拉強度σb≤500Mpa以下）
GQ50B Reinforcing Bar Cutting Machine technical parameters (reinforced ultimate tensile strength σb≤500Mpa below)
|
項目/型號Item/Model |
GQ50B型 |
|
|
切斷鋼筋最大直徑（mm） Maximum Cutting Steel Bar Diameter |
φ6-φ50 |
|
|
切螺紋鋼最大規格（mm） Cutting Deformed Steel Bar Diameter |
Ⅲ級螺紋鋼 Grade II Thread steel |
φ6-φ36（Ⅲ級螺紋鋼） |
|
Ⅳ級螺紋鋼 Grade ⅣThread steel |
φ6-φ32（Ⅳ級螺紋鋼） |
|
|
切刀公稱沖程（mm） Cutting Knife Nominal Stroke |
50 |
|
|
連續切斷次數（次/min）Continuous Cutting Off Times |
32 |
|
|
電動機型號Motor Model |
Y112M-2 |
|
|
電動機功率Motor Power |
4.0Kw |
|
|
額定電壓Rated voltage |
380 V±5% |
|
|
電動機轉速Motor Rotating Speed |
2880r/min |
|
|
外型尺寸（mm）Dimensions |
1260×530×730 |
|
|
包裝尺寸（木箱出口型） Package Size(wooden box export) |
|
|
|
整機質量The Whole Weight |
500±10Kg |
|
品牌型號 ： GQ50B
GQ50B鋼筋切斷機，適用于建筑工程上各種鋼筋混凝土中普通碳素鋼及熱軋圓鋼和螺紋鋼的切斷，為您的施工降低大量的人力，大幅提高功效。該機具有以下特點。
1、 體積小、結構緊湊、噪音低，沖程大。
2、 潤滑性能好：采用箱式封閉結構，齒輪飛濺潤滑（油面應不高于油標刻線，使機器始終處于適當的潤滑狀態）
3、 功率損耗少：因潤滑條件的改善，齒輪軸端采用滾動軸承，阻力小，與同類切斷機相比同負載時功率損耗可降低三分之一。
移動方便：四輪著地，機動靈活，穩定可靠，維修方便
GQ50B Reinforcing Bar Cutting Machine, is usedto cut off all kinds of normal carbon steel, The cross-section of the steel bar end cut by this machine is very parallel andlevel, which can be directly for threading working. It reduce the worker numberand improve the efficiency significantly. This machine has the
followingcharacteristics.
1. Small volume, compactstructure, low noise, large stroke.
2. Lubricating performance: adopt the box-typeclosed structure, gear splash lubrication (oil surface should notbe h igher than standard oil
groove, so that the machine is always in a properlubrication state)
3. Less power loss: due to the improvement oflubrication condition, gear shaft end uses rolling bearings, theresist ance is small, compared
with the same kind of cutting machine, the power loss can bereduced
by 1/3.
Convenient movement: the four wheelson the ground, flexible, stable
and reliable, convenient maintenance.
